You will find this on the engineer's Gas Safe ID card. What should I do if my question isn't answered on any of your FAQ pages? However, during the COVID-19 pandemic some ACS assessment centres closed or are now operating at reduced capacity. Such written confirmation Where assessment centres can operate, they should do so, and follow Gov.uk advice on good hygiene. • The business' systems for ensuring that gas work is undertaken by competent Engineers • That the operating systems result in safe gas work • That the relevant industry Regulations and Standards are being met The key gas safety areas are : 1. We’ll need to terminate a visit to your property if our inspector falls ill with COVID-19 symptoms or must self-isolate in accordance with the Governments guidelines. Your well-being and that of other household members at your property is our priority while carrying out any gas pipework and/or appliance inspections. Compressed natural gas (CNG) frequently asked questions, Cross Government Group on Gas Safety and Carbon Monoxide (CO) Awareness, Carbon Monoxide: Are you at risk - Dept of Health, Information on Carbon Monoxide - Health Protection Agency. 1 What is a Gas Safe Register? Guidance on keeping yourself safe can be found here: gov.uk/coronavirus. See working safely - other people’s homes for more guidance: If you’re classed as clinically extremely vulnerable, you should refer to the latest government advice, see link below, to determine whether the clinically extremely vulnerable are currently being advised to shield. Your customer will then receive a We welcome your feedback on our website and would be grateful if you would take a few minutes to complete a short survey about your experience on the site. Ensuring the SAFETY of your Family and Property with Gas Safety Registered Engineers good order on two ocason,when the heating Checking that your plumbing and heating is working well is essential particularly if you are planning home improvements. The minimum qualification is ‘Pipework’ however gas engineers will usually be qualified for a range of gas work. You should also check to see if local lockdown arrangements are in place See: If Government advice is that the clinically extremely vulnerable are currently being advised to shield or if local lockdown arrangements require it, we would ask that you advise us in advance so that we can make arrangements for the inspection of the gas engineer’s work at your property to be carried out at a later date. If a risk is clearly identified, they reserve the right to terminate the visit to ensure the safety of you, any accompanying gas engineer and themselves. This led to some engineers being unable to take their ACS reassessment or experiencing a delay in securing a date for reassessment. Consumers will be able to see pictures of the registered engineers and details of their qualifications. This evidence of competence relates only to matters of gas safety and is obtained by every engineer through a recognised route of training and … Engineers MUST maintain their Gas Safe registration during any extension period applied due to ACS expiry during the pandemic if they are carrying out gas work. All contractors working with boiler and pressure vessel equipment must be licensed by Technical Safety BC. Route 2 to becoming Gas Safe registered. Supervision and Quality Control 4. if and when an inspection visit to the property is required. Engineers will be expected to evidence that they have made reasonable attempts to find alternate assessment provision (e.g. So that you, other members of your household or staff and our Inspectors can all stay safe, we won’t visit properties where those who maybe present: Please contact your customer to establish if they are self-isolating, shielding or fall within a vulnerable group. 1.1.1 Who is a gas safe registered engineer? Act (HSWA) (also see Note 1). Location. During the new lockdown period businesses will initially be required to undertake a Remote Technical Assessment (RTA), the outcome of that RTA will determine whether a Face to Face inspection is required. Check an. We offer management support to guide you through the process of ensuring safety at all times whether you are a Landlord, Builder or Gas Contractor, we have the ability to improve your current operations or introduce new policies and procedures to control gas safety now and in the future. Once you have installed your own gas appliances, you must make sure that these are maintained and checked by a Gas Safe registered engineer each year. Check an engineer - are they Gas Safe registered? A gas engineer can only be aligned to a registered business and be issued with a license to undertake gas work on behalf of a registered business if they hold a valid and current qualification. Unfortunately most people only worry about making sure their plumbing is in packs up or when it leaks. So that you, other members of your household and our Inspectors can all stay safe, we won’t visit properties where those living in the home: We’ll be pleased to carry out an inspection of the gas engineer’s work at your property once you’re feeling well enough and have completed any self-isolation requirements (as per the current Government guidelines) and are happy for us to visit. If you are a member of the public, guidance on keeping yourself safe can be found here: https://www.gov.uk/coronavirus. Any queries should be sent to email@example.com. Businesses who are otherwise impacted financially as a result of COVID-19 should access the various support mechanisms which have been put into effect by Government: No, you do not. Contractors must ultimately exercise their own judgement. This means all our visits will start with our inspector undertaking a risk assessment before starting any inspection. When you use Gas Safe Register to report the installation of a heat producing gas appliance, we will inform the relevant LA on your behalf. AREA also recommends to contractors, when using this Guide, to always refer to the national legislation, and guidance if any, of the Member State they are dealing with. We are trained to the highest standard and have years of experience in new boiler installations. Gas Safe registered engineers carry an identity card which consumers are encouraged to ask an engineer for before they have gas work carried out in their home. The front of the card has a photograph, a registration number and an expiry date and the reverse shows the different categories of work that the engineer is qualified to undertake, e.g. 22.214.171.124 What type of gas work can be done by a registered gas engineer? The inspector will ensure the area of the home worked in is left clean and tidy. If you do not do this, we will arrange for this check to be carried out and will charge you the amount that it cost us to arrange. Gas Safe Register is the official gas registration body for the United Kingdom, Isle of Man and Guernsey, appointed by the relevant Health and Safety Authority for each area.By law all gas engineers must be on the Gas Safe Register. Gas Safe registered engineer. Engineer Selection and Induction 2. No previous experience. STEP ONE . We politely ask that the area where the inspector will be working, is clear, tidy and cleaned before the visit. All Gas Safe registered engineers will have a list of the work they are qualified to carry out on the back of their Gas Safe ID card. All Gas Safe registered engineers carry ID cards which tell you which appliances they are qualified to work on. cookers, boilers, gas fires. WaterSafe WaterSafe is an online register and search facility of approved plumbing contractors working in the UK. We may also ask you and any other household members to wait in another room or go outside while the inspection is carried out or open doors and windows in the room they are working in. After 31 March 2021 Gas Safe Register will only consider renewal of Gas Safe registration without current ACS in exceptional circumstances. Gas Safety (Installation & Use) Regulations 1998, Gas safety checks - records and what to keep. Alternatively consumers can check an engineer is registered by texting Gas and the engineers seven digit licence number to 85080. You will also need to undertake your own risk assessment prior to our visit. Advice for the ongoing COVID-19 outbreak. Its purpose is to help customers find a competent and qualified plumber. To maintain their Gas Safe registration, engineers must ensure that expired ACS qualifications are renewed: Engineers are advised to book ACS reassessment in advance, as while most assessment centres are open and have availability, some are fully booked up 2 months in advance. kitchen installers, builders etc., carrying out kitchen refurbishment work or similar, understand that they also have certain responsibilities under primary health and safety legislation, e.g. You can check that the engineer or the business is on the Gas Safe Register website. This Gas Safety Management Plan has been devised for the use of the Crown and its contractors in the execution of contracts for the Crown. The Gas Safe Register is a mandatory registration scheme, and all engineers who are working on gas must be registered and carry their licence card in order to work legally in the UK. Order Replacement Installation Certificate, https://www.gov.uk/guidance/working-safely-during-coronavirus-covid-19/homes#homes-2-1, https://www.gov.uk/government/publications/staying-alert-and-safe-social-distancing, https://www.gov.uk/government/publications/guidance-on-shielding-and-protecting-extremely-vulnerable-persons-from-covid-19, https://www.euskills.co.uk/gas-acs-centre-directory/, Returning to work – Guidance for registered engineers, https://www.gov.uk/guidance/working-safely-during-coronavirus-covid-19, https://www.gassaferegister.co.uk/help-and-advice/covid-19-advice-and-guidance/landlords/, https://www.gov.uk/coronavirus/business-support, the gas appliance which is the subject of the visit, the roof-space (if appropriate) to check the chimney or flue, we may also need to visually inspect any other installed gas appliances, Wait in another room or go outside while the inspection is carried out, Open doors and windows in the room which we are working in. in GB the Health and Safety at Work etc. Beta This is a new way of showing guidance - your feedback will help us improve it. We’ll call you before our visit to check that you and other household members are well and that no one has suspected COVID-19 symptoms, is self-isolating or shielding. Advice for the ongoing COVID-19 outbreak. Please explain to your customer that we may need to access these areas. Landlords also have duties under these regulations. cookers. Following confirmation of an engineerâs registration the consumer will be offered the option to reply with Photo and the engineers licence number to be sent the engineers photograph. The purpose of the registration scheme is to ensure that only competent gas contractors, who employ registered gas installers and appropriate material resources, undertake gas installation work for enhancing the safety of gas users and members of the public. As a Gas Safe registered business you are responsible for ensuring the LA is notiﬁed. ensuring compliance with the safety regulations within their specific gas markets/industries. The Gas Safe Register website has a âFind an Engineerâ service where you can find a local registered engineer simply by inputting your postcode. 1.1 What does it do? Find By. Renewal of Gas Safe registration in these circumstances, will be considered on a case by case basis and is not guaranteed. Please visit: https://www.gassaferegister.co.uk/help-and-advice/covid-19-advice-and-guidance/landlords/. We will terminate a visit to your registered business address if our Inspector has COVID-19 symptoms or must self-isolate in accordance with the Government guidelines. By law all gas businesses must be on the Gas Safe Register. Please note, if you are shielding (vulnerable) or have COVID-19 symptoms, and you have a planned visit from a Gas Safe Register Inspector, or a gas engineer from any business, you must make all parties aware and have the appointment re-arranged. The prime contractor is responsible for ensuring that all subcontractors have completed the CSAP prior to beginning work at NIH. Category 2 Applicant. Consumers will receive a text back confirming whether the registration number is registered. The HSE has provided a wealth of new information for landlords including a variety of scenarios which may help provide some clarity for those concerned for their well-being or the well-being of their customers. Again consumers will receive a text message confirming if the licence card number is registered. All visits will commence with our Inspector completing a risk assessment. Business. If you are working and need to be registered, registration fees may be paid by monthly Direct Debit, spreading the … If you’re classed as clinically vulnerable, the latest advice from government is that work can be carried out in homes of the clinically vulnerable, but workers should be particularly vigilant in respect of social distancing and good hygiene. Consumers can check a business is registered by texting Gas and the business registration number to 85080. To check if an individual engineer is currently Gas Safe registered you will need to know their unique 7-digit licence number. engineers or registered sub-contractors; c)agree to the Register inspecting any addresses relating to the Registered Business where gas work has been carried out, provided the consent to do so has been given by the property owner. Alternatively consumers can call the freefone helpline on 0800 408 5500. If you are checking to confirm whether a contractor is registered, and they do not appear on the website, you can contact Safe Electric by email firstname.lastname@example.org call us at 01-4929966 in order to verify whether they are currently registered. Training and Qualifications 3. Please also ask your customer if they and any other household members will be willing to: If any risks are identified, please arrange another inspection appointment. Check a. A risk assessment that is specific to your situation will be carried out prior to entering your property, which will determine the appropriate PPE to be worn, for example, gloves, face coverings. Engineers are expected to take all reasonable measures to maintain their ACS qualifications, including planning ahead, as maintaining gas safety competence is essential for registered gas engineers. This will enable us to assess the risk and keep customers, engineers and our employees safe. Information on ACS assessment Centres in your area can be found at https://www.euskills.co.uk/gas-acs-centre-directory/. 1.2 Landlord vs. Tenant Gas Safety HSE aims to reduce work-related death, injury and ill health. In South Africa there are four main gas industries that are regulated by the Department of Labour, they are; Natural Gas, Liquefied Petroleum Gas, Air Conditioning and Refrigeration Gas and Compressed Industrial and Medical Gases. You should also check to see if local lockdown arrangements are in place, see: If Government advice is that the clinically extremely vulnerable are currently being advised to shield or if local lockdown arrangements require it, your landlord can find out more about what is expected of them in respect of gas safety checks on the Gas Safe Register website. After a Gas Safe registered engineer has fitted or serviced your gas appliance, they will often leave you with a report which explains what checks they did. A binding interpretation of Community legislation is the exclusive competence of the European Court of Justice. 5.2 All contractors will be required to show evidence of their Gas Safe Registration and provide written confirmation of the Gas Safe Registration for individual engineers that will be working on any of the Association’s properties. Engineers who find themselves in this position should make every effort to seek and find alternative assessment provision, which will allow them to meet qualification timescales. In short: no. 1.1.2 How will I know if the gas engineer is a registered one? Think of the Gas Safe Register as being similar to the service provided by the DVLA. Centres should advise engineers not to attend if they should be self-isolating. Lists of Competent Persons, Registered Gas Supply Companies, Registered Gas Installers, Registered Gas Contractors, Approved Domestic Gas Appliances issued by Gas Standards Office of the Electrical and Mechanical Services Department, Government of the Hong Kong Special Administrative Region. Distributing and processing the Declaration of Conformance Certificates (Completion Certificates) that an RGI must issue to a customer once the gas works are complete. As an additionalÂ Â optionÂ consumers can also request a photo of their engineer to be sent to their phone, providing an engineer has signed up to this service. Consumers can also check that the engineer who has come to undertake the work is the engineer the âfoundâ on the website through the âCheck an Engineerâ service on the Gas Safe Register website.Â By inputting the licence number from the engineers ID card. As enrolment on the public website is not required, not all RECs may be searchable. This program is used to assess contractor's commitment to safety through a review of lagging and leading indicators. See What we do for information about when Gas Safe will inspect or investigate gas work. Please be aware: as this is an ever-changing situation information may be updated, amended and added on a regular basis. It is important that non gas registered contractors e.g. We want to ensure customers, gas engineers and our employees stay safe. Please be aware: as this is an ever changing situation information may be updated, amended and added on a regular basis. Changes to the legislation. Contractor Selection and Evaluation. Ensuring you understand what Gas Safe Registered means is more important than seeing the logo, research into the company where you can before letting anyone take on the repairs or installation Rest assured however, that we at County Heating and Plumbing are a registered company, and any of our engineers are fully qualified to complete any work. Gas Safe Register replaced CORGI as the gas registration body in Great Britain and Isle of Man on 1 April 2009 and Northern Ireland and Guernsey on 1 April 2010. New entrant into the industry. This report may be issued as a gas safety record, sometimes referred to as a gas safety certificate depending on the job you have asked them to do. Alternatively consumers can call the freefone helpline on 0800 408 5500. We will make an initial assessment of any complaints or concerns raised to us by telephone, making use of available video calling technologies to help with that assessment. A licensed contractor is responsible for ensuring compliance with the Safety Standards Act, all relevant regulations, and all applicable safety orders and directives. Clicking on ‘Yes’ will open the questionnaire in a separate window and will not interrupt or replace your current open web pages. and engineers must be registered on the Gas Safe Register. Regulation 36 of the GSIUR relating to Landlord Gas Safety Records does not specify that a signature is required from the recipient, only from the engineer undertaking the safety checks. Check an engineer - are they Gas Safe registered? A boiler needs to be regularly serviced to ensure all components are checked and working correctly – and … READ MORE > Brighton & Hove Boiler Service, Repairs and Plumbing. Processing Timelines Contractors are required to enroll in the Contractor Safety Assessment Program (CSAP). Appliances that use gas such as your boiler are perfectly safe if installed by a Gas Safe registered engineer but could be deadly if installed by someone unqualified, that’s why it is critical that you look for the Gas Safe logo and check your engineer’s credentials. Never let anyone who isn’t on this register install a boiler at your home as you and your family could be at risk from serious gas poisoning explosions and fires! So that you and our employees stay safe, where appropriate, all our Inspectors will use PPE that meets Government and Health and Safety Executive guidelines. NOTE: As a result of the current lockdown (Dec 2020/Jan 2021), we have been advised that in some cases, scheduled assessments have been cancelled and rebooked by the assessment centres, and that the revised dates being offered mean they will not be able to meet the above timescales (renewing their ACS by 31 March 2021). If you’re classed as clinically extremely vulnerable, you should refer to the latest government advice, see link below, to determine whether the clinically extremely vulnerable are currently being advised to shield. Please note that we issue engineers with a new ID card annually, and each new card will have a different licence number. Extension of registration is a temporary measure which is regularly reviewed and does not remove the standing requirement for registered gas engineers to maintain their ACS certification and renew certification every 5 years. You will also need to check if they are happy to apply the social distancing guidelines. It’s all to do with health and safety and ensuring any gas work is done safely giving us peace of mind. For more information, please see Returning to work – Guidance for registered engineers. We will use this information to confirm next steps e.g. If a risk is identified, they reserve the right to cancel the visit to ensure the safety of you, themselves and your customer. The Gas Safe Register is a mandatory registration scheme, and all engineers who are working on gas must be registered and carry their licence card in order to work legally in the UK. In short, yes, we are making some temporary adjustments to processes to make best use of technology and to minimise face to face exposure wherever possible. PDP’s Gas Engineers are fully Gas Safe registered and committed to ensuring that you receive the highest level … READ MORE > Boiler Servicing. Engineer … By law all gas businesses and their engineers must be on the Gas Safe Register to work legally on gas equipment. Whether you want to know more about what we can offer, or want to discover more about our competitive prices, give us a call today. We are Gas Safe registered, and Baxi Certified. If you smell gas, or if you have concerns about the safety of your appliances, you should call the gas emergency service provider on 0800 111 999, and switch off appliances until the gas emergency supplier, or a registered gas engineer, has attended and advised that the appliances are safe to use. https://www.gassaferegister.co.uk/. Gas Safe Register provides a self-certiﬁcation facility to allow your business to meet this legal requirement. Since being established in 2003, the business has grown from strength to strength, ensuring a prompt and professional service, hence, we have developed an outstanding reputation within the local community. 126.96.36.199 What else is being done by the Gas Safe Register? The latest detailed guidance on working safely in people's homes can be found on the UK Government website https://www.gov.uk/guidance/working-safely-during-coronavirus-covid-19. We have developed a unique Fast Track Gas Installers training programme that allows new entrants to the gas industry to ultimately achieve their gas qualifications in the fastest possible time. Ensuring that Registered Gas Installers (RGIs) are assessed on a regular basis to ensure that they are operating in line with the appropriate national safety standards. The Gas Safe Register is an official list of gas businesses that are registered to legally work with boilers, cookers, fires and all other gas appliances. Ideally yes, but as part of their PPE our inspectors will have their own hand sanitiser. provision of evidence of rebooked assessments by original provider and correspondence with at least two alternate providers, seeking alternative assessment arrangements) before requesting their circumstances are taken into consideration for renewal of their Gas Safe registration. The Gas Safe Register website has a ‘Find an Engineer’ service where you can find a local registered engineer simply by inputting your postcode. Please click the sign in button below to access the engineer portal. Keep your family safe. To ensure your safety and that of our employees, our inspectors will apply the two-metre social distancing measures. This guidance is for anyone who may have a duty under the Gas Safety (Installation and Use) Regulations 1998, including those who install, service, maintain or repair gas appliances and other gas fittings.